When you update the /etc/cumulus/nf file, you must restart switchd for the changes to take effect. # Storm Control setting on a port, in pps, 0 means disable For example, to enable broadcast storm control for swp1 at 400 packets per second (pps), multicast storm control at 3000 pps, and unknown unicast at 500 pps, edit the /etc/cumulus/nf file and uncomment the storm_control.broadcast, storm_control.multicast, and storm_control.unknown_unicast lines: sudo nano /etc/cumulus/nf To configure storm control for physical ports, edit the /etc/cumulus/nf file. On Broadcom switches, ARP requests over layer 2 VXLAN bypass broadcast storm control they are forwarded to the CPU and subjected to embedded control plane QoS instead.Storm control is not supported on a switch with the Tomahawk2 ASIC.Resource Diagnostics Using cl-resource-query.Using Nutanix Prism as a Monitoring Tool.Simple Network Management Protocol - SNMP.Monitoring System Statistics and Network Traffic with sFlow.Using NCLU to Troubleshoot Your Network Configuration.Monitoring Interfaces and Transceivers Using ethtool.Understanding the cl-support Output File.Network Switch Port LED and Status LED Guidelines.Bidirectional Forwarding Detection - BFD.Unequal Cost Multipath with BGP Link Bandwidth.Equal Cost Multipath Load Sharing - Hardware ECMP.Hybrid Cloud Connectivity with QinQ and VXLANs.Ethernet Virtual Private Network - EVPN.Virtual Router Redundancy - VRR and VRRP.Spanning Tree and Rapid Spanning Tree - STP.Default Cumulus Linux ACL Configuration.Authentication, Authorization and Accounting.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |